NOTE: The arbor shown is one of the “short” versions (7/8″ body length arbors).
-
If you need to hold 7/8″ or 1″ I.D. cutters for milling or gear cutting, these arbors are designed to hold them on your Sherline mill. They are steel arbors turned with a #1 Morse taper for use in the Sherline headstock spindle. Each is available in a choice of standoff lengths of 7/8″ (short) or 1-3/4″ (long).
|
Always wear safety glasses when operating machine tools. |
Download 3230 PDF Instructions
3230 | Mill Arbor, 7/8″ Diameter (Short) |
|---|---|
| 32320 | Mill Cutter Arbor Cap 7/8″ |
| 32340 | Mill Arbor 7/8″ dia. x 7/8″ Body Length (Short) |
| 40660 | #10 Washer 3/16 |
| 40690 | 10-32 X 3/4″ SHC Screw |
3231 | Mill Arbor, 7/8″ Diameter (Long) |
| 32320 | Mill Cutter Arbor Cap 7/8″ |
| 32370 | Mill Arbor 7/8″ dia. x 1-3/4″ Body Length (Long) |
| 40660 | #10 Washer 3/16 |
| 40690 | 10-32 X 3/4″ SHC Screw |
3235 | Mill Arbor, 1″ Diameter (Short) |
| 32330 | Mill Cutter Arbor Cap 1″ |
| 32380 | Mill Arbor 1″ dia. x 7/8″ Body Length (Short) |
| 40660 | #10 Washer 3/16 |
| 40690 | 10-32 X 3/4″ SHC Screw |
3236 | Mill Arbor, 1″ Diameter (Long) |
| 32330 | Mill Cutter Arbor Cap 1″ |
| 32390 | Mill Arbor 1″ dia. x 1-3/4″ Body Length (Long) |
| 40660 | #10 Washer 3/16 |
| 40690 | 10-32 X 3/4″ SHC Screw |
Compatible with drill chucks using the #1 Morse taper in the mill, the gear tooth cutter, and #1 Morse blank.
